Furuno FAR-2107 Series Service Manual page 242

1 BACK
2 [DATA BOX]
3 [F1]
4 [F2]
5 [F3]
9 CUSTOMIZE/
TEST
SPU Ver.02.40
and after
6 [F4]
Sets the kind of data to be displayed in the data box, zoom
OFF/ON (x2, x3) and number of ARPA and AIS data box.
Related NAV data is displayed by the setting in [Menu] ->
7: NAV DATA.
For zooming, place the cursor in the display area, click the
right button, select ZOOM in the [Cursor] menu, place the
cursor at a spot to be zoomed and click the left button.
The specified operation setting can be registered to the [F1]
to [F4] keys and retrieve by pressing the registered key.
For instance, the setting can be as follows;
F1: INT REJECT ON, 2
to
F4: Heading line OFF
NOTE: How to set the USER DEFAULT (Current memory
setting)
In case of F-KEY, the current memory will be in the state
by pressing the registered KEY for a long time.
1. F-KEY in the [Menu] -> 9 -> 7 -> 0 -> 2
2. Select （Fx: F1 – F4） in the [Menu] -> 9 -> F1 – F4
3. Select USER DEFAULT in the [Menu] -> 9 -> Fx ->
5
4. Press the selected Fx key.
In case of HOLD, the current memory is registered when
selecting STOR from HOLD.
1. Select HOLD in the [Menu] -> 9 -> 7 -> 0 -> 2.
2. Select (Fx: F1 – F4) in the [Menu] -> 9 -> F1 – F4
3. Select USER DEFAULT in the [Menu] -> 9 -> FX ->
5.
4. Select STOR in the [Menu] -> 9 -> 7 -> 0 -> 2
3-32
3.3 Main Menu Tree