Furuno FAR-2107 Series Service Manual page 291

[TRAIL] - 3: NARROW TRAIL
(Setting of narrow trail)
[TRAIL] - 8: TRAIL LENGTH
[TRAIL] - 9: TRAIL HIDE
[TRAIL] - 0: TRAIL COLOR
[MARK] -0: MAP MARK COLOR
(Specification of chart color. CHART is disabled on the IMO type.)
[ANT INF] – 8: SUB MONITOR
(Easy ON/OFF switching between radar and sub monitor)
[COURSOL] – TARGET TRACK ON, TARGET TRACK OFF
(ON/OFF setting of TARGET TRACK is not displayed on the IMO type)
Differences in Functions
Range
Handling of chart
NAV data
When handling DTM
Sentence error
When handling AIS
display, there is no DTM
sentence error.
EPFS error display when
GPS accuracy is changed.
Range of Alarm Zone
Cursor data box
Handling of the HDT
sentence
Type
IMO, A 0.125/0.25/0.5/0.75/1.5/3/6/12/24/48/96
B, C 0.125/0.25/0.5/0.75/1.5/3/4/6/8/12/16/24/32/48/96/120
IMO, A Rader/Rader+Plotter
B, C Rader/Plotter/Rader+Plotter
nd
IMO IEC61162 2
A, B, C IEC61162
DATUM error is displayed when there is no DTM (WSG-84)
IMO
sentence.
DATUM error is not displayed even when there is no DTM sentence.
A, B, C However, when DTM data is discontinued, DATUM error is
displayed.
When DTM is WGS-84, ON/OFF of "[Menu]->4->8:
IMO AIS FUNCTION" is enabled. When DTM is other than WGS-84, AIS
function is turned off.
A, B, C No restriction
IMO EPFS error is displayed.
A, B, C EPFS error is not displayed.
ALARM 1 is set in a range of 3 to 6 NM. There is no restriction on
IMO
the range of ALARM 2.
A, B, C There is no restriction either on ALARM 1 and ALARM 2.
IMO, A One (1)
When "3: SET DRIFT" is set to OFF in the [SPD] icon menu, one
B, C
more cursor data box is added.
IMO Fixed 34.8 kbps (SPU Ver. 02.40and 50.08 and after)
A, B, C 4800 to 34.8 kbps
4-27
Table 4.4.6 Functions for Radar Type
Functions
ED NMEA Ver-3.0 (Equivalent)
NMEA Ver-1.5 (Equivalent)
4.4 Initialize Setting
NO NO YES YES
NO NO YES YES
NO NO YES YES
NO NO YES YES
NO NO YES YES
NO NO YES YES
NO YES YES YES