C-DOT DSS MAX-XL Installation Manual page 87

Fuse No.
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
F16
F17
F18
F19
F20
Note : In case of CM cabinet the Fuse rating (i.e. F5 & F6) is 36 Amps.
For enabling the fuse blow indication some points are to be shorted with help
of shorting stubs. If these points are not shorted then the fuse blown
indication will not come. For indicating blown fuse of -48V supply to the
cabinet (copy 0 & copy 1) and filter boxes of the cabinet, four points have to
be shorted. These points are mentioned on per cabinet basis in the table
below. W`xx' indicates the position of the shorting points on the FBI cards. A
switch of FBI card is provided to enable the extension of blown fuse to
Operation & Maintenance Alarm Box. After installation, this switch should
be kept upwords to enable the OMA alarm. The same steps mentioned above
INSTALLATION MANUAL
POWER DISTRIBUTION PANEL AND ITS FBI MOUNTING
Fuse Rating Amps.
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
-
-
2
2
TABLE 8.1
Equipment Connected
Cabinet-No 1 (BM/LM) Copy-0
Cabinet-No 1 (BM/LM) Copy-1
Cabinet-No 2 (BM/LM) Copy-0
Cabinet-No 2 (BM/LM) Copy-1
Cabinet-No 3 (BM/LM) Copy-0
Cabinet-No 3 (BM/LM) Copy-1
Cabinet-No 4 (BM/LM) Copy-0
Cabinet-No 4 (BM/LM) Copy-1
Cabinet-No 5 (BM/LM) Copy-0
Cabinet-No 5 (BM/LM) Copy-1
Cabinet-No 6 (BM/LM) Copy-0
Cabinet-No 6 (BM/LM) Copy-1
Cabinet-No 7 (BM/LM) Copy-0
Cabinet-No 7 (BM/LM) Copy-1
Cabinet-No 8 (BM/LM) Copy-0
Cabinet-No 8 (BM/LM) Copy-1
FBI Copy-0
FBI Copy-1
87