Jumper Settings In Cm-Xl - C-DOT DSS MAX-XL Installation Manual

W8
b)
W9&W11
W10&W12
16.3.16.2. The TUI card jumper setting will be as per the position of the SUM.
Note :
a)
b)

16.4. JUMPER SETTINGS IN CM-XL

Following are the card types with current versions (requiring jumper settings) used
in CM-XL and their respective slots.
SL. NO.
1. APC-PSM383/F-S02
2. APC-BPC441/O-S02
3. APC-BME442/H-S02
4. APC-CBX380/H-S01
5. APC-CCK381/F-S02
6. APC-NSC369/H-A01
7. APC-SCU362/H-M02
8. APC-SCU363/H-M02
9. APC-HPU395/H-M00
10. APC-HPU396/H-M00
11. APC-ESM397/H-S01
INSTALLATION MANUAL
Close W20 Close
The TUC jumper setting will be according to the position where the
7SU frame is put --
Principal TU
Close
Close
At present the SUM should preferably be put in principal TU.
Moreover if SUM is in BM-1, DM2 should not be an RSU.
It HPC is used in place of BPC in SUM then BME card jumper setting
to be as follows :
W2 & W3 should be shorted and W1, W4 to be left open.
CARD TYPE WITH
VERSION
1st Conc. TU 2nd Conc. TU
Open Close
Close Open
FRAME NO.
(NAME)
1 (BTU0) 4
(BTU1)
5 (SCU) 6
(HPU)
5 (SCU)
6 (HPU)
5 (SCU)
5 (SCU)
5 (SCU)
5 (SCU)
5 (SCU)
6 (HPU)
6 (HPU)
1 (BTU0)
4 (BTU1)
JUMPER SETTINGS
3rd Conc. TU
Open
Open
SLOTS
5 to 12 & 15 to 22
5 to12 & 15 to 22
12, 15
12, 15
6, 21
11, 16
8, 19
5,22
9, 16
C0-MOTHER BOARD
C1-MOTHER BOARD
C0-MOTHER BOARD
C1-MOTHER BOARD
5 to 12 & 15 to 22
5 to 12 & 15 to 22
339