Table of Contents
Advertisement
Chapter 16.
Note :
*
*
*
16.3.15.
Jumper Settings for ISTU Motherboard
Part Code : APC-ILM403/H-M00
Only "ITC ID" an "ICC ID" jumpers to be put according to the ISTU position.
Other jumpers to be left open.
Note :
Bit 0 is assumed to be '0' and not available for setting, '7' jumpers are
available for ITC/ICC setting.
i)
336
The mentioned jumpers should be shorted
The jumpers not mentioned to be left open
For RBM (RSU) W20 (i.e. MSB) to be left open.
When ISTU is in 2nd TU position.
\\\\
\\\\
\\\\
\\\\
\\\\
\\\\
\\\\
\\\\
ITC ID = A8
C-DOT DSS MAX-XL
Advertisement
Table of Contents
