C-DOT DSS MAX-XL Installation Manual page 238

Chapter 10.
S.No. Cable No.
01. RCK0
02. RCK1
03. RCK2
Note :
See Fig. 10.47 (c) & 10.47 (d)
10.6.13. CM Intra-Rack Cables
In this section all the internal cables of CM-XL are briefly covered as
assembly of these cables are done and routed within CM-XL at factory.
Number of cables for each type is given in tables 10.27 to 10.43 and the
routing diagrams for these cables are given in figures 10.48 to 10.62. For
assembly of these CM-XL Internal Cables, Assembly Instructions and
corresponding drawings supplied alongwith system engineering documents
shall be referred.
ADDRESS, DATA & CONTROL BUS CABLE ROUTING
238
Reference Clock Cable (RCK) Routing
Source BM Side Frame
Frame-DTU
SLOT:4,8,18 OR 22
CONNECTOR `B' TAB
TO RETAIN-3
SLOT:4,8,18 OR 22
CONNECTOR `B' TAB
TO RETAIN-3
SLOT:4,8,18 OR 22
CONNECTOR `B' TAB
TO RETAIN-3
Table 10.26 (a)
Destination: CM Side
Frame No.5
CONNECTOR-J27
(NSC-0) & J46
(NSC-1) TAB TO
RETAIN-1
CONNECTOR-J27
(NSC-0) & J46
(NSC-1) TAB TO
RETAIN-2
CONNECTOR-J27
(NSC-0) & J46
(NSC-1) TAB TO
RETAIN-3
Length Remarks
12 MTRS.
12 MTRS.
12 MTRS.
C-DOT DSS MAX-XL