C-DOT DSS MAX-XL Installation Manual page 214

Chapter 10.
SL. No. C-DOT ASSY NO
1. ACB-MAXXTA01-000
2. ACB-MAXXTA02-000
3. ACB-MAXXTA03-000
4. ACB-MAXXTA04-000
5. ACB-MAXXTA05-000
Note :
Connector insertion position indicated as X/P/Q/R/S/T
X
P
Q
R
S
T
Note :
Modification in Test Access Cable routing and placement in case of
Digital Trunk Terminal Unit (DTU/ISTU/CCS7 UNIT) :
a)
b)
214
CABLE
MARKER NO.
TA01
TA02
TA03
TA04
TA05
= BM number
= Rack number (1-3)
= Frame/Card cage no. (1-6)
= Slot no. (1-26)
= Connector row number (A, B)
= Position on connector (1-4) (Also indicates polarisation tab to be
retained on the connector)
X can take values 1 to 32.
If principal TU is DTU/CSU then concerned TA cable is not at all
required as there would not be any analog trunks in this ITU.
Also note that test access cable does not get inserted on the 2nd slot of
the motherboard at all if the terminal unit happens to be a Digital
Trunk Unit (DTU/CCS7 UNIT).
If principal TU is ISTU, then concerned TA cable has to be put in the
position J1/4 connector.
TABLE 10.21
FROM TO
X/P/Q/R/S/T X/P/Q/R/S/T
X/1/1/2/A/4 X/1/2/2/A/4
X/1/2/2/A/4 X/1/3/2/A/4
X/1/3/2/A/4 X/1/4/2/A/4
X/1/1/2/A/3 X/2/1/2/A/4
X/2/1/2/A/4 X/2/2/2/A/4
X/2/2/2/A/4 X/2/3/2/A/4
X/1/2/2/A/3 X/3/1/2/A/4
X/3/1/2/A/4 X/3/2/2/A/4
X/3/2/2/A/4 X/3/3/2/A/4
X/1/3/2/A/3 X/2/4/2/A/4
X/2/4/2/A/4 X/2/5/2/A/4
X/2/5/2/A/4 X/2/6/2/A/4
X/1/4/2/A/3 X/3/4/2/A/4
X/3/4/2/A/4 X/3/5/2/A/4
X/3/5/2/A/4 X/3/6/2/A/4
REMARKS CABLE
LENGHT
Daisy chained 195 cm
Cable for test
access
Daisy chained 280 cm
Cable for test
access
Daisy chained 280 cm
Cable for test
access
Daisy chained 280 cm
Cable for test
access
Daisy chained 280 cm
Cable for test
access
C-DOT DSS MAX-XL