Jumper Settings In Bm-Xl/Lm - C-DOT DSS MAX-XL Installation Manual

Grouped Jumpers (GP)
In this type of jumper settings, there are more than one number of 2/3 pin jumpers
and the instruction required is which two pins have to be shorted for all the jumpers
belonging to the group.
Note :
In all of the above type of jumper settings, the reference is made keeping the card
such that the ejector side is at LHS and the connector side is at RHS as viewed from
the component side. For further information, Assembly Diagram (AD) of the
respective cards can be referred to.

16.3. JUMPER SETTINGS IN BM-XL/LM

Following are the card types with current versions (requiring jumper settings) used
in BM/LM and their respective slots.
SL. NO. CARD TYPE WITH VERSION
1. APC-ANN078/T-S03
2. APC-BPC441/O-S02
3. APC-BME442/H-S02
4. APC-TIC002/F-S10
5. APC-MSC014/F-S07
6. APC-MSD013/F-S06
7. APC-MFC043/F-S08
8. APC-TGA077/T-S02
9. APC-TSC008/F-S06
10. APC-TUI084/T-S03
11. APC-TUC046/T-S03
12. APC-TUB003/T-M04
13. APC-BPU438/H-M01
14. APC-BPU439/H-M01
INSTALLATION MANUAL
JUMPER SETTINGS
FRAME SLOTS
TU, DTU 3
BPU 12, 15
BPU 7, 20
TU 11, 15
TSU 6, 21
TSU 9, 18
TSU 8, 19
TSU 4, 5
22, 23
TSU 3, 24
TSU 12, 15
TU 13, 14
DTU 12, 15
DTU 11, 16
TU Copy 0/1
BPU COPY-0
BPU COPY-1
329