Table of Contents
Advertisement
For an exchange of 2 suites configurations it has been shown in Fig.3.13 that
End plate-1, 2 & 3 have been used to seal the uncovered portion. But in case
the exchange has 3 suites then these plates will have to be removed and
respective trough assemblies will be used to have interconnection between
suite 2 and suite 3. Then suite 3 uncovered portion will be sealed with these
plates as shown in Fig.3.13.
3.3.5.
Cabinet Placement
Fig.3.10 shows the view after placement of eight cabinets on the Basemount
assemblies. It is suggested that the cabinets should be erected on the first
suite before taking up the installation of second suite and subsequent suites.
3.3.6.
Erection of Subsequent Suites
After the erection of first suite, and cabinet placement, second suite erection
is to be done as shown in Fig. 3.11. It is similar to the first suite. The
interconnecting trough assemblies are different which are clearly shown in
Fig.3.12.
3.4.
ASSEMBLY ITEMS
Table 3.4.1 Base Mount Assembly fixing with Floor
Sl. No.
1.
MAI-WKSTZ000-301
MAI-WKSTZ001-301
2.
MAI-PLSTP003-401
3.
MCW-SPSTS009-401
4.
MPI-WKSTZ135-401
5.
MPI-WKSTZ136-401
6.
MPI-WKSTZ137-401
7.
MCN-HESTM003-401
Table 3.4.2 Base Joining Plate Fixing with Base Mount Assembly
Sl. No.
1.
MAI-WKSTZ000-301
2.
MAI-WKSTZ001-301
3.
MPI-WKSTZ003-401
4.
MCS-HESTM002-401
5.
MCW-HESSP006-401
6.
MCW-SPSTS006-401
INSTALLATION MANUAL
CDOT PART NO.
OR
CDOT PART NO.
IRON WORK INSTALLATION
DESCRIPTION
Base mount assy-1
Base mount assy-2
Washer, Steel M-16
Spring Washer-M16
Liner-1
Liner-2
Liner-3
Nut Hex Steel-M16
DESCRIPTION
Base mount assy 1
Base mount assy 2
Base Joining Plate
SCR HEX STL M8x20
Washer - MB
Washer SPR. STL - M8
QTY.
1
1
4
4
4
QTY.
1
1
1
8
8
8
39
Advertisement
Table of Contents
