C-DOT DSS MAX-XL Installation Manual page 319

very close together such that in case any fault occurs in any inverter, terminals
supply can be tapped from adjacent DB, connected with the other inverter.
When all the three inverters are working, then the distribution of inverters to VDUs
and printers can be given as per the table 13.1. In case of failure of any one of the
inverters, supply can be trapped from the nearest inverter.
Note :
Inverters' output ground should not be extended to DBs. i.e. only line and
neutral are to be connected to VDUs and printers.
INSTALLATION MANUAL
VDUs & Printer
VDU1
VDU2
VDU3
VDU4
VDU5
VDU6
VDU7
VDU8
PRN1
PRN2
Table 13.1
Corresponding Inverter
INV-1
INV-2
INV-3
INV-3
INV-2
INV-2
INV-1
INV-2
INV-1
INV-3
INVERTOR ARRANGEMENT
319