C-DOT DSS MAX-XL Installation Manual page 375

BM EQUIPAGE PROCEDURE
CRE-SPL-ROUT:RUT-COD-mmm.RUT-FLG=1-CNB-NA-GA, CRG-RTN=1-8,
ILT=Y;
mmm = Exchange code appended to ILT code.
For eg, if the ILT code is 01793 and exchange code is 2 then the commands to
be given are :
MOD-SYS-PARM:PAR-NAM=OWN-STD-LEN,PAR-VAL=5;
CRE-SPL-ROUT:RUT-COD=017932,RUT-FLG=1-CNB-NA-GA,CRG-RTN=
1-8, ILT=Y;
Note : 3
For Satellite Exchange :
Routes may be created in a similar manner.
For eg, if the ILT code is 01793 and Satellite exchange code is 81 then the
commands to be given are :
MOD-SYS-PARAM:PAR-NAM=OWN-LEN, PAR-VAL=5;
CRE-SPL-ROUT:RUT-COD=0179381, RUT-FLG=1-CNB-NA-GA,
CRG-RTN=1-8, ILT=Y;
INSTALLATION MANUAL 375