Installing The Visualdsp++ Ez-Kit Lite License; Default Settings; Table 2-2 User Configurable Ez-Kit Lite Settings - Analog Devices ADSP-21065L EZ-KIT Lite Manual

2.5.3 Installing the VisualDSP++ EZ-KIT Lite License

Before the VisualDSP++ software can be used, the license must be installed. To install the
EZ-KIT Lite license, follow these steps:
1. Make sure VisualDSP++ has been installed first.
2. Insert the VisualDSP++ CD into the CD-ROM drive if it is not already
in the drive.
3. Once the CD browser is on the screen select the "Install License"
option.
4. Now follow the setup wizard instructions. (Note: Make sure that you
have the proper serial number located on the back of the CD holder.)

2.5.4 Default Settings

After you have installed the board and utility software, your PC and EZ-KIT Lite have
the default settings shown in Table 2-2. You can change these settings through the
Settings menu in the debugger.

Table 2-2 User Configurable EZ-KIT Lite Settings

Selection
Comm Port
Baud Rate
Codec Sample Rate
Codec Source
Codec Gain
2.5.4.1 On-Line Help
The VisualDSP++ Debugger comes with a complete on-line help file and Adobe .pdf
files of all manuals.
•
You can use the context help button
or
•
Highlight a command and press F1.
For help on commands and dialogs click from the toolbar Help -> Help Topics to get to
www.BDTIC.com/ADI
Default Setting
Comm 1
115200
48000 Hz
Microphone
0.0
to get help on any command or icon
15