Table of Contents
Advertisement
4 DEMONSTRATION PROGRAMS
4.1 Overview
This chapter describes loading and running the demonstration programs supplied with the ADSP-21065L
EZ-KIT Lite board. The demos are designed to run on the VisualDSP++ Debugger which is supplied on
the CD that shipped with this product. For detailed information on debugger features and operation, see
the VisualDSP++ Debugger Guide & Reference and the Debugger Tutorial (for ADSP-2106x Family
DSPs).
4.2 Starting the VisualDSP++ Debugger
After the VisualDSP++ software and license have been installed, click the Windows Start menu.
1. Select Programs -> VisualDSP++ -> Debugger from the Start menu. The debugger interface
appears.
2. From the Session menu, select New Session. The Target Selection dialog appears.
3. Configure the debug session as shown in Figure 4-1 and click OK.
A Target Message dialogue box will appears.
www.BDTIC.com/ADI
Target Selection Dialog
Figure 4-1
33
Advertisement
Table of Contents
