Table 3-6 Available Memory Locations On The Ez-Kit Lite - Analog Devices ADSP-21065L EZ-KIT Lite Manual

Table 3-6 shows currently used and available memory locations on the EZ-KIT Lite board. The user may
not change these locations in their programs.

Table 3-6 Available Memory Locations on the EZ-KIT Lite

Memory Range
0x00008000 - 0x0000801F
0x00008020 - 0x00008023
0x00008024 - 0x00008033
0x00008034 - 0x00008037
0x00008038 - 0x0000807B
0x0000807C - 0x0000807F
0x00008100 - 0x00008FFF
0x00009000 - 0x000097FF
0x0000C000 - 0x0000DFFF
0x01000000
0x01000001
0x01000008 - 0x0100000F
0x01000010
0x03000000 - 0x030FFEFF
0x030FFF00 - 0x030FFF05
0x030FFF06
0x030FFF07 - 0x030FFF0C
0x030FFF0D
0x030FFF0E
0x030FFF0F
0x030FFF10
0x030FFF11 - 0x030FFFFF
www.BDTIC.com/ADI
Availability
Interrupt Vectors - user (48-bit)
IRQ0 vector (reserved by monitor and not overwritten
on any .dxe load)
Interrupt Vectors - user (48-bit)
SPORT Vector (reserved by monitor)
Interrupt Vectors - user (48-bit)
SWI3 Vector (reserved by monitor)
User Program Space (3840 48-bit locations, internal
RAM block 0)
Kernel Code (48-bit, internal block 0)
User space (can be configured as 8192 x 32, or 2K x
48 + 4K x 32 or
4K x 48 +2K x 32)
EMAFE address location (external block 0)
EMAFE data location (external block 0)
16550 UART registers (external block 0)
AD1819 reset address (external block 0)
User space (external block 3; 1048320 32-bit
locations in SDRAM)
User AD1819 transmit buffer
User AD1819 transmit ready flag
User AD1819 receive buffer
User AD1819 receive ready flag
User SWI3 data pointer
User SWI3 number of data items
User SWI3 data type
Reserved for Kernel
26