Getting Started; Overview; Contents Of Your Ez-Kit Lite Package - Analog Devices ADSP-21065L EZ-KIT Lite Manual

2 GETTING STARTED

2.1 Overview

This chapter provides information to install the software and the ADSP-21065L evaluation
board. It is important that installation of the software and hardware are in the order presented for
correct operation. This chapter also provides basic board information and conatins the following
sections:
•

Contents of your EZ-KIT Lite package

•
PC configuration
•
Installation procedures
2.2 Contents of Your EZ-KIT Lite Package
The EZ-KIT Lite evaluation board contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human body
and equipment and can discharge without detection. Permanent damage may
occur on devices subjected to high energy discharges. Proper ESD precautions
are recommended to avoid performance degradation or loss of functionality.
Unused EZ-KIT Lites should be stored in the protective shipping package.
The ADSP-21065L EZ-KIT Lite evaluation board package should contain the following items.
If any item is missing, contact the vendor where you purchased your EZ-KIT Lite or Analog
Devices.
•
ADSP-21065L EZ-KIT Lite board
•
Power cable with DC power supply (7.5 Volts)
•
RS-232 serial port 9-pin cable
•
EZ-KIT Lite CD containing examples, target .dll files, help files, and utilities
•
VisualDSP++ CD
•
Registration card - please fill out and return
www.BDTIC.com/ADI
11