Table of Contents
Advertisement
EZ-KIT Lite Installation
EZ-KIT Lite Installation
Follow these instructions to ensure correct operation of the product soft-
ware and hardware.
Step 1: Attach the provided USB plugs (labeled
vided USB cable.
Step 2: Connect the EZ-KIT Lite board to a personal computer (PC) run-
ning CCES.
There are two connection options: using an Analog Devices emulator or
using the standalone debug agent.
Using an Emulator:
1. Plug one side of the assembled USB cable into the USB connector
of the emulator. Plug the other side into a USB port of the PC run-
ning CCES.
2. Attach the emulator to the header connector
the EZ-KIT Lite board.
Using the Debug Agent:
1. Attach the standalone debug agent to connectors
EZ-KIT Lite board.
2. Plug one side of the provided USB cable into the USB connector of
the debug agent
into a USB port of the PC running CCES.
1-6
(labeled
ZP1
USB
ADSP-BF609 EZ-KIT Lite Evaluation System Manual
and
Mini
Male
(labeled
P1
and
P1
). Plug the other side of the cable
) to the pro-
) on
JTAG
of the
ZP1
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-BF609 EZ-KIT Lite and is the answer not in the manual?