Table of Contents
Advertisement
Owner's Manual
6. Position the dynamic backrest's positioning
plates and fasten bolts C.
7. Position the lower back post at the desired
angle and insert bolts B in the appropriate
adjustment holes.
Note – To adjust the backrest angle, you must
decrease the tension of the dynamic backrest by
turning the handle counterclockwise.
8. With a 4mm Allen key and a 10mm wrench,
fasten bolts B.
9. Reinstall and adjust the height of the upper
back post.
10. Reinstall the backrest, the tension bar and
stroller bar, if applicable.
11. Reinstall armrests and propulsion wheels.
Modifying the dynamic backrest angle
The angle of the backrest can be adjusted to
accommodate the needs of the occupant.
1. Turn the tension handle counterclockwise, to
decrease the backrest tension.
2. With a 4mm Allen key and a 10mm wrench,
remove bolts B.
3. Once the bolts are removed, reposition the back
post at the desired angle.
4. Reinsert bolts B in the adjustment holes
corresponding to the desired angle and tighten
firmly.
5. Readjust the backrest tension.
Adjusting the dynamic backrest tension
The dynamic backrest allows you to adjust the
tension of the back post to better accommodate
the occupant's changing needs.
- To decrease tension, turn handle D
counterclockwise (to the left).
- To increase tension, turn the handle D
clockwise (to the right).
53
ENGLISH
Revision 0
July 2022
Advertisement
Table of Contents
