Page 1
This booklet contains important information about this product. Please give to the owner upon delivery. Révision 01 Ce livret contient d’importante informations relatives à ce produit. Veuillez remettre à May 21 l’utilisateur à la livraison.
BACKREST INTRODUCTION Physipro Inc. is proud to count you among its customers and would like to thank you for the confidence you have shown by purchasing our product. This user manual was created to provide you with all the information needed to allow you to use our product in a safe and optimal way.
DESCRIPTION The Valdis is a soft sling backrest designed to offer optimal comfort and support by encompassing the curvature of the occupant’s back. Capable of adapting to diverse spinal morphologies, the Valdis is particularly recommended for people with hyperkyphosis. The cushioned back of the Valdis is cut with precision to provide a deeper immersion.
COMPOSITION Cushioning : 1 ½ urethane " squared patterned Straps : Nylon and Velcro Outer cover : Supplex and Oxford Mounting system : Zippered back post covers and screws OPTIONAL COMPONENTS Incontinence cover: Transparent cover with Velcro Folding tension bar: standard or with headrest mounting fixture Lateral supports : Adjustable, Foldable and adjustable or Fixed to back post...
TECHNICAL SPECIFICATIONS Nominal Widths: 14 to 24 (35 cm to 60cm) " " Nominal Heights: 14 to 24 (35 cm to 60cm) " " Thickness (Padding included): 1½ " Weight (Padding included): 2.97 lbs (16 x 21 " " Backrest size To correctly choose the size of your back, it is important to consider the width of the wheelchair.
• Before use, it is important to verify the quality and condition of the backrest components, please refer to the Maintenance checklist, page 15. Physipro Inc. backrests are reserved exclusively for use on mobility aids (manual or power wheelchairs). Always install backrest with the provided mounting hardware.
WARNINGS Consult a healthcare professional: Physipro Inc. recommends that a health care professional such as a doctor or therapist, experienced in seating and positioning, be consulted to determine, and install the required seating system and make any necessary adjustments. Center of gravity: Installing a backrest on a wheelchair may affect the center of gravity of the wheelchair and may cause the wheelchair to tip backwards, possibly resulting in injury.
INSTALLATION Installing the Valdis backrest Please read all the following instructions before beginning installation. The steps required to properly install the Valdis backrest must be followed in the order that they are listed. Required tool: Square screwdriver #2 (North America) or " Phillips" screwdriver (Europe) 1.
Page 11
Installing the lateral supports (option) The lateral supports offered with the Valdis backrest can be installed on ¾ to 1 back post. The use of universal " " mounting clamps on all the lateral supports offered, ensure height positioning precision and easy installation.
Page 12
Adjusting the lateral supports to the occupant’s torso Required tool: 4mm Allen key 1. Slightly loosen screw(s) C. 2. Position the lateral supports as near as possible to the occupant’s torso. 3. Fasten screw(s) C tightly. 4. Repeat these steps for the second lateral support. Adjustable Fixed to back post Foldable and adjustable...
Page 13
Adjusting the lateral support depth and height Required tool : 4mm Allen key 1. Slightly loosen screws E. 2. Position the lateral support’s depth and height by moving it in the horizontal and vertical adjustment slots. 3. Fasten screws E tightly. 4.
MAINTENANCE Regular cleaning eliminates the accumulation of dirt and grime and helps extend the life of your backrest. It is recommended to visually inspect the components of the backrest during the cleaning process. Cleaning the backrest and lateral support covers 1.
Page 15
Maintenance checklist Upon receiving your backrest, it is important to complete all the inspections listed in the maintenance checklist to ensure the proper function and condition of the backrest and mounting hardware. Every 6 Maintenance checklist Weekly Monthly Months Backrest ...
Parts and components that are replaced or repaired under one of these warranties will remain subject to the warranty for the remainder of the warranty period. Physipro Inc. agrees to repair or replace, free of charge, any defective part or component for the full duration of the warranty period.
MANUEL D’UTILISATION – DOSSIER VALDIS INTRODUCTION Physipro Inc. est fière de vous compter parmi ses clients et tient à vous remercier particulièrement pour la confiance que vous lui démontrez en vous procurant l’un de ses produits. Le présent manuel d’utilisation a été conçu pour vous permettre d’utiliser votre produit en toute sécurité et de façon optimale.
Le Valdis est un dossier souple à tension réglable conçu pour offrir un confort optimal en épousant les courbures du dos. Capable de s’adapter à tout type de morphologie, le Valdis est particulièrement recommandé pour des personnes présentant une hypercyphose.
COMPOSITION Rembourrage : Uréthane quadrillé 1½ " Courroies : Nylon et Velcro Housse de base : Supplex et Oxford Ancrage de dossier : Recouvrement de montants de dossier avec fermeture éclair et visserie COMPOSANTS OPTIONELS Housse d’incontinence : pellicule transparente Barre de tension pliable: standard ou avec ancrage d’appuie-tête Appui-thoracique : Réglable, Rabattable et réglable...
• Avant utilisation, il est important de vérifier la qualité et la condition des composants du dossier, référez- vous à la Liste de vérification, page 28Erreur ! Signet non défini.; • Les dossiers de Physipro Inc. sont réservés exclusivement à l’utilisation sur une aide technique à la mobilité (fauteuil à propulsion manuelle ou électrique);...
AVERTISSEMENTS Consulter un professionnel de la santé : Physipro Inc. vous recommande de consulter votre ergothérapeute ou professionnel de la santé afin de le déterminer le système de dossier approprié et le positionnement, afin de déterminer et d’installer le système de dossier requis et de procéder aux ajustements nécessaires.
INSTALLATION Installer le dossier Valdis Les étapes suivantes expliquent comment procéder à l’installation complète du dossier. Il est conseillé de suivre les étapes dans l’ordre indiqué. Outil nécessaire : Tournevis à tête carrée #2 (Amérique) ou Tournevis " Phillips" (Europe) 1.
Page 24
Installer les appuis-thoraciques (option) Les appui-thoraciques offertes avec le Valdis peuvent être installés sur des montants de ¾" à 1". Peu importe votre modèle d’appui-thoracique, l’utilisation de mâchoire universelle comme système de fixation permet un ajustement en hauteur précis et une installation simple.
Page 25
Ajuster l’appui-thoracique au torse de l’usager Outil nécessaire : Clé Allen de 4mm 1. Dévisser légèrement la/les vis C; 2. Positionner l’appui-thoracique le plus près possible du torse de l’usager; 3. Resserrer la/les vis C fermement; 4. Répéter l’opération pour l’autre côté. Rabattable et réglable Réglable Fixé...
Page 26
Ajuster l’appui-thoracique en hauteur et en profondeur Outil nécessaire : Clé Allen de 4mm 1. Dévisser légèrement les vis E; 2. Positionner l’appui thoracique en hauteur et en profondeur, en déplaçant l’appui-thoracique dans les fentes de réglage horizontale et verticale; 3.
ENTRETIEN Un nettoyage régulier élimine la saleté et permet de prolonger la durée de vie du dossier. Il est recommandé de vérifier chaque composant du dossier lors du nettoyage. Nettoyage des housses du dossier et appuis-thoraciques 1. Enlever la housse et attacher la fermeture éclair; 2.
Page 28
Liste de vérification Lors de la réception du dossier, il est important de compléter toutes les vérifications indiquées dans la liste de vérification pour assurer le bon fonctionnement et la bonne condition du dossier et de sa quincaillerie. Liste de vérification Chaque Chaque Tous les...
Le produit ne doit pas être utilisé ou modifié avant l’inspection du réparateur désigné. Dans le cas où vous ne recevez pas un service satisfaisant, s'il vous plaît écrivez directement à Physipro Inc., à l’adresse écrite ci-dessous ou par courriel à info@physipro.com, veuillez inclure le nom et l’adresse du fournisseur, une courte description du défaut, la date de facturation ainsi que du numéro de série du produit, s’il y a lieu.
Page 30
Europe Canada Importateur/Distributeur : 370, 10 avenue Sud Société PHYSIPRO Sherbrooke (Québec) J1G 2R7 Village des Entrepreneurs Canada 461 Rue Saint Léonard 49000 ANGERS - France T. 1 800 668-2252 T. 02 41 69 38 01 Révision 01 F. 819 565-3337 F.