Installing The Folding Tension Bar; Folding The Tension Bar; Installing The Folding Tension Bar With Headrest Mounting Fixture; Folding The Tension Bar With Headrest Mounting Fixture - Physipro XL 5 Owner's Manual

ENGLISH

Installing the folding tension bar

1. With a precision knife, cut the
rubber grip covers at the ends of
the handles.
2. Attach tension bar to the ends of
the handles by fastening screws A
with a 4 mm Allen key.

Folding the tension bar

1. Press push buttons B and D.
2. Slide the locking tube C onto
the inner tube.
3. Fold tension bar.

Installing the folding tension bar with headrest mounting fixture

1. With a precision knife, cut the
rubber grip covers at the ends of
the handles.
2. With a 4mm Allen key, loosen
screws A.
3. Adjust the width of the tension bar.
4. Attach tension bar to the ends of
the handles by fastening screws B
with a 4 mm Allen key.
5. Tighten screws A firmly.

Folding the tension bar with headrest mounting fixture

Press lever C and fold tension bar.
WARNING
Never push or pull wheelchair with the tension bar.
Always use the back post handles to move the wheelchair.
54
XL5 and XL RF