Table of Contents
Advertisement
Owner's Manual
Dynamic Backrest
Installing the dynamic backrest
1.
Remove the standard backrest (see
section
Removing
backrest).
Insert alignment sleeves A.
2.
3.
Install
the
positioning plates and the lower
back post at the desired angle.
Note – To adjust the backrest angle,
you must decrease the tension of the
dynamic backrest by turning the
handle
counterclockwise.
4.
With two 10mm wrenches, fasten
bolts B with washers C and nuts D.
5.
Reinstall and adjust the height of the
upper back post. Insert screw E in the
appropriate adjustment hole and
firmly tighten with a 10mm wrench.
6.
Reinstall the backrest, the tension
bar and stroller bar, if applicable.
7.
Reinstall armrests and propulsion
wheels.
8.
Reinstall the activation levers and
cables.
the
standard
dynamic
backrest's
45
ENGLISH
Revision 0
July 2022
Advertisement
Table of Contents
