Footrest; Installing The Footrest; Removing The Footrest; Adjusting Footrest Length - Physipro XL 5 Owner's Manual

Owner's Manual

Footrest

The footrest is removable and can swivel inwards or outwards and can be equipped
with a standard flip-up footplate or a flip-up footplate with angle and depth
adjustments.
Three models of footrest are available: 60º, 70º et 90º.
Each model features an extensive range of adjustments to ensure optimal support of
the lower limbs.
Footrest 60º: 11 ¼'' to 21'' (280 mm to 530 mm)
Footrest 70º: 10 ¾'' to 20 ½'' (255 mm to 508 mm)
Footrest 90º: 10 ½'' to 20 ½'' (254 mm to 508 mm)
Adjustable in increments of ½''.

Installing the footrest

1. Insert pivot saddle A into the receiver on
the front frame tube.
2. Turn the footrest inwards until the
footrest locks in place.

Removing the footrest

1. Press and hold lever B while turning the
footrest outwards.
2. Lift the footrest upwards until it is
completely removed from the receiver.

Adjusting footrest length

1. With a 10mm wrench, remove screw C.
2. Raise or lower the inner adjustment
tube until the desired length is
obtained.
3. Reinstall screw C in the appropriate
adjustment hole and tighten firmly.
59
ENGLISH
Revision 0
July 2022