ENGLISH
Levelling caster stem housing
This adjustment is necessary following a change in position of the caster wheel, to
ensure the wheelchair moves in a linear trajectory and to facilitate manual
propulsion.
1. With a 5mm Allen key, unfasten screws A located inside the frame.
2. Orient the eccentric hexagonal bushing B so that the fork is at 90° to the ground.
3. Tighten screws A while holding the eccentric hexagonal bushing B with a ½" deep
socket wrench.
WARNING
Make sure all assembly hardware is securely tightened. Improper
•
fastening of the assembly hardware may result in serious injury to the
wheelchair occupant and may damage the wheelchair.
Make sure both caster forks are positioned at the same height before
•
using your wheelchair. Improper positioning of the caster forks may result
in serious injury to the wheelchair occupant and may damage the
wheelchair.
40
XL5 and XL RF