Armrest; T'' Type Armrest - Physipro XL 5 Owner's Manual

ENGLISH

Armrest

''T'' Type Armrest

The ''T'' type armrest is made with a foam padding to improve comfort and can be
removed to facilitate transfers. The ''T'' type armrest offers a height adjustment range
between 7'' and 14'' (178 mm and 355 mm). Adjustable in increments of ½'' for both
the XL5 and XL RF.
Installing the ''T'' type armrest receiver
1. Position receiver B on the seat rail
and insert threaded sleeve A through
the seat rail and receiver B.
2. Fasten screws C with a 4mm Allen
key, while holding threaded sleeve A
with a 12mm wrench.
Note - The clothing guard is
attached to the receiver.
Installing the ''T'' type armrest
1. Press and hold lever D.
Note – Make sure push button E is
not released, if so, push it back down.
2. Insert armrest into receiver B.
3. Release lever D to lock armrest in
place.
Adjusting the ''T'' type armrest height
1. Press and hold lever D.
2. Raise or lower armrest.
3. Release lever D once the desired
height is obtained.
Note - Make sure the armrest is fully
engaged in the adjustment holes.
Removing the ''T'' type armrest
1. Press and hold lever D.
2. Lift up and remove armrest.
56
XL5 and XL RF