Instructions; Required Tools - Physipro XL 5 Owner's Manual

Owner's Manual

4. Instructions

Required tools

Our wheelchairs are designed to be easily adjusted and maintained with standard
hand tools.
The following tools are required:
• Metric wrenches: two 10 mm wrenches, 12 mm and two 13mm wrenches
• Metric Allen keys: 1,5mm, 2,5mm, 3mm, 4mm and 5 mm
• Imperial wrenches: 7/16", 3/4" et 1-1/8"
• Imperial Allen keys: 1/4"
• Two 3/4" socket wrenches
• 3/4" deep socket wrench
• Phillips screwdriver
WARNING
Never use pneumatic or electric tools, these may damage your wheelchair.
•
WARNING
All modifications made to your wheelchair must be performed by a
•
qualified technician. Failure to observe this warning may lead to serious
injury to the occupant or any other individual who is near the
wheelchair.
Be careful not to pinch your fingers when installing a wheelchair
•
component or using a removable part.
35
ENGLISH
Revision 0
July 2022