Owner's Manual
Elevating and Articulating Legrest
Installing the legrest
1. Install tube end A into the receiver on the
front frame tube.
2. Turn the legrest inwards until the legrest
locks in place.
Adjusting legrest height at knee level
1. With a 2.5mm Allen key, unfasten all 4
bolts B.
2. Place the upper part of the legrest onto
tube.
3. Position the legrest at the desired height
and insert bolts B in the appropriate
adjustment holes.
4. Tighten all 4 bolts B firmly.
Adjusting legrest length
1. With a 4mm Allen key, unfasten screws C.
2. Raise or lower the inner adjustment tube
until the desired length is obtained.
3. Reinstall screws C in the appropriate
adjustment holes and tighten firmly.
Removing legrest
1. Pull lever D towards you and turn legrest
inwards or outwards.
2. Lift the legrest upwards until it is
completely removed from the receiver.
Adjusting legrest angle
- To increase angle, lift the legrest upwards.
- To decrease the angle, press and hold lever
E and push the legrest downwards.
61
ENGLISH
Revision 0
July 2022