Physipro XL 5 Owner's Manual page 19

Owner's Manual
RESISTANCE TO IGNITION OF POSTURAL SUPPORT DEVICES
The XL5 wheelchair is equipped with postural support devices (seat, backrest, armrest,
footrest kit) that are composed with a combination of fabrics and foams that comply to
the test requirements of CAL-117, except for the « Mercury » fabric, that has not received
CAL- 117 certification. However, the « Mercury » fabric has passed the match test (FR test
Match lighting) and cigarette test (FR test EN 1021-1 cigarette test).
WHEELCHAIR FOR USE AS A SEAT IN A MOTOR VEHICLE
Declaration that this wheelchair model conforms with the requirements of ISO 7176-19
and is designed to be used in a forward-facing position when used as a seat in a motor
vehicle.
Types of tie-downs that are suitable for
the wheelchair (four-point strap type tie-
downs, wheel clamps, other types of
docking systems, etc.)
Declaration that this wheelchair comes
equipped with securement points that
are fixed to the
successfully passed
requirements of ISO 7176-19.
Rating of the ease of use of the motor vehicle's three-point seat belt
as required by ISO 7176-19, section 5.5.a.
Rating to the degree to which the use of the motor vehicle's three-
point seat belt adequately secures the occupant as required by ISO
7176-19, section 5.5.b.
Never remove the tie-down strap securement points that secure your wheelchair to a
motor vehicle. If the tie-down strap securement points are removed, they cannot be
replaced, and your wheelchair will no longer comply with ISO/DIS 7176-19:19.
For more information, please consult the Transport section of this manual.
Note that ease of access and maneuverability in a motor vehicle can be greatly
diminished by the size of the wheelchair, and a smaller turning diameter generally
facilitate access to the vehicle and maneuverability in a forward-facing position.
For more information, please consult the Transport section of this manual.
Use as a seat in a motor vehicle
(SEAT, BACKREST, ARMREST, FOOTREST KIT)
frame and has
the testing
19
Four-point strap type tie-downs.
For more information, please consult
the Transport section of this manual.
The XL5 wheelchair is equipped with
securement points that are fixed to the
frame, meeting the requirements of ISO/DIS
7176-19:2019 and has successfully passes a
frontal impact crash test with a medium
sized, 76.3 kg (170 lbs) crash test dummy.
For more information, please consult the
Transport section of this manual.
Yes. For more information, please
consult the Transport section of
this manual.
ENGLISH
Excellent
Excellent
Revision 0
July 2022