Table of Contents
Advertisement
ENGLISH
Modifying sling seat tension
1. With a Philips screwdriver, loosen all screws A
on the left side of the wheelchair.
2. Unfasten the sling seat flap and adjust the
tension of the sling seat.
3. Fasten the sling seat flap when the desired
tension is obtained.
4. Tighten all of screws A firmly.
WARNING
When tightening the sling seat, it is important that the wheelchair is fully
opened and that the sling seat tension does not prevent the wheelchair
from unfolding completely.
Pelvic Positioning Belt
The primary function of the pelvic positioning belt is to help the occupant maintain
a proper posture and to secure the occupant in the wheelchair
Installing the pelvic positioning belt
1. Position both parts of the
attachment block to the seat rail.
2. With a 5mm Allen key, tighten screw A firmly.
3. With a 4mm Allen key, secure the belt end to
the attachment block by fastening screw B.
Adjusting the pelvic positioning belt
To adjust the length of the positioning belt, slide
slide buckle D and tighten or loosen until the belt fits snugly without causing any
discomfort.
WARNING
When using your wheelchair, it is important to always fasten your
•
positioning belt for added protection.
It is important to adjust your positioning belt to maximize comfort
•
and safety.
Improper use can result in serious injury or death.
•
belt end
Belt end
attachment
block
the belt str
50
XL5 and XL RF
ap C into the plastic
Advertisement
Table of Contents
