Physipro XL 5 Owner's Manual page 66

ENGLISH
3. Firmly tighten bolt B.
4. Test and readjust wheel lock position until the
required brake force is obtained, and wheel
locks effectively immobilize the wheelchair.
5. If necessary, move the wheel lock bracket on the
side frame rail.
6. Once the required brake force is obtained, make
sure all bolts are securely fastened.
WARNING
Never stop a moving wheelchair with wheel locks. Wheel locks are used
•
to lock the propulsion wheels and immobilize the wheelchair. Wheel locks
are not designed to slow down or stop a moving wheelchair.
When engaged, the wheel lock pressure bar should embed ⅛
•
the tire.
Using the anti-rollback wheel locks
To engage the anti-rollback wheel locks, push the anti-roll back block downwards
and slightly turn the propulsion wheels backwards.
To disengage the anti-rollback wheel locks, pull the anti-rollback block upwards.
66
XL5 and XL RF
'' ''
to ¼ into