Propulsion Wheel Horizontal Positioning - Physipro XL 5 Owner's Manual

ENGLISH
WARNING
After all adjustments or the reinstallation of the propulsion wheels, it is
essential that the stability of the wheelchair be verified. Adjustments to the
front caster wheels, the wheel locks, the anti-tips and the propulsion
wheel's mounting block may be necessary. Repositioning of the seat and
backrest may also be required. These adjustments must be performed by a
qualified technician.

Propulsion wheel horizontal positioning

The horizontal position of the propulsion wheel directly affects the wheelchair's
stability. Placing the propulsion wheel toward the front, has the disadvantage of
reducing wheelchair stability but has the advantage of facilitating propulsion.
Finding the right position to maximize stability and ease of use is essential. To
accommodate the needs of each individual, both the XL5 and XL RF wheelchairs
provide 13 horizontal positions.
Follow these steps to adjust the horizontal position of the propulsion wheel.
1. Remove the propulsion wheel. Depending on the type of axle installed, refer to
section Removing Propulsion Wheels – Threaded Axle or Removing Propulsion
Wheels – Quick-Release Axle.
2. With a 1⅛" wrench, untighten nut A to loosen washer B and lock washer C.
3. Move axle bushing D along the mounting plate slot until correctly positioned and
place lock washer C and washer B.
4. With a 1⅛" wrench, tighten nut A firmly.
5. Reinstall propulsion wheel.
44
XL5 and XL RF