Physipro XL 5 Owner's Manual page 80

ENGLISH
THREE-POINT SEAT BELT
Positioning:
1- Position the pelvic belt across the front of the lower pelvis. The pelvic belt
should be in direct contact with the occupant's pelvis and hip bones. The
pelvic belt should be positioned at an angle between 45 and 75 degrees to
the horizontal. If these requirements cannot be reached, the pelvic belt can
be positioned securely in the optional zone, at an angle between 30 and 45
degrees to the horizontal. (see Figure 6)
2- A steeper pelvic belt positioning angle in the preferred zone is
recommended. A sharper angle will help minimize the formation of a vertical
gap between the occupant and the pelvic belt and will considerably diminish
the risk of the occupant sliding under their belt.
Figure 6
80
XL5 and XL RF