Owner's Manual
Anti-Rollback Wheel Locks
The anti-rollback wheel lock provides added safety when moving up a slope or ramp,
if the wheelchair begins to move backwards, the wheel lock mechanism will engage
and immobilize the propulsion wheels. The anti-rollback wheel lock system can be
installed in our factory if selected in the order form or can be added on a standard
wheel lock.
Installing the anti-rollback wheel lock
1. With a 4mm Allen key, hold screw A in
place while turning the standard wheel
lock's
pressure
completely.
2. Insert camshaft C in hole of the anti-
rollback block.
3. Place washer D and spring E on camshaft
C.
4. Position camshaft C on the wheel lock and
tighten screw A firmly. Make sure the
dowel pin F remains in a horizontal
position.
Adjusting the brake force
With a 5mm Allen key, loosen bolt B.
1.
2.
Move wheel lock in the wheel lock bracket's
slot to obtain the required brake force.
-
To increase brake force, move wheel
lock closer to the propulsion wheel.
-
To reduce brake force, move wheel
lock further from propulsion wheel.
B
bar
to
remove
65
ENGLISH
Revision 0
July 2022