Physipro XL 5 Owner's Manual page 63

Owner's Manual
3. Firmly tighten bolt B.
4. Test and readjust wheel lock position until the
required brake force is obtained, and wheel locks
effectively immobilize the wheelchair.
5. If necessary, move the wheel lock bracket on the side
frame rail.
6. Once the required brake force is obtained, make sure
all bolts are securely fastened.
Note – When engaged, the wheel lock pressure bar should embed ⅛'' to ¼'' into
the tire.
Using wheel locks
Push-to-lock
- To lock wheels, push handle C
forward.
- To unlock wheels, pull handle C
backwards
Push-to-lock
WARNING
Never stop a moving wheelchair with wheel locks. Wheel locks are used
•
to lock the propulsion wheels and immobilize the wheelchair. Wheel locks
are not designed to slow down or stop a moving wheelchair.
When engaged, the wheel lock pressure bar should embed ⅛
•
the tire.
Pull-to-lock
- To lock wheels, pull handle C
backwards.
- To unlock wheels, push handle C
forward.
Pull-to-lock
63
ENGLISH
'' ''
to ¼ into
Revision 0
July 2022