Propulsion Wheel Lateral Positioning - Physipro XL 5 Owner's Manual

Owner's Manual

Propulsion wheel lateral positioning

This modification is used to move the propulsion wheels closer or further from the
frame.
Follow these steps to adjust the lateral position of the propulsion wheel.
1. Remove the propulsion wheel. Depending on the type of axle installed, refer to
section Removing Propulsion Wheels – Threaded Axle or Removing Propulsion
Wheels – Quick-Release Axle.
2. With a 1⅛" wrench, loosen or tighten nuts A and B to move axle bushing C
inwards or outwards.
3. Once axle bushing C is correctly positioned, tighten nuts A and B firmly.
4. Reinstall propulsion wheel.
WARNING
After adjustments are made, make sure all assembly hardware is firmly
tightened, otherwise injury or damage may occur.
45
ENGLISH
Revision 0
July 2022