Physipro XL 5 Owner's Manual page 87

Owner's Manual
• To secure the wheelchair to the vehicle, install the rear tie-down straps to
the rear securement points of the wheelchair. Install the front tie-down
straps to the front securement points, make se the vehicle's front anchor
points are spaced slightly wider than the wheelchair, this ensures better
lateral stability. (see Figure 3)
WARNING
• The XL RF was tested with and must be used with the wheelchair's
complete tie-down securement system and the vehicle's occupant restraint
system to ensure compliance with the ISO 10542-1 requirements.
Figure 3
SECUREMENT POINT EXAMPLE
Figure 4
87
ENGLISH
Revision 0
July 2022