U'' Type Armrest - Physipro XL 5 Owner's Manual

Owner's Manual

''U'' Type Armrest

The ''U'' type armrest is made with a foam padding to improve comfort and can be
flipped back to facilitate transfers.
The ''U'' type armrest offers a height adjustment range between 7'' and 16 ½''
(178 mm and 406 mm). Adjustable in increments of ½''.
Installing the ''U'' type armrest
1. With a 4mm Allen key, unfasten
bolts A while holding nuts in place
with a 10mm wrench.
2. Insert alignment sleeve C and
position receiver B on positioning
plate.
3. Insert screw A and screw D and
firmly tighten with a 4mm Allen key
and a 10mm wrench.
4. With a 4mm Allen key and a 10mm
wrench, fasten receiver E at the front
of the seat rail.
Flipping back the ''U'' type armrest
1. Press lever F.
2. Flip back armrest.
Adjusting the ''U'' type armrest height
1. Press lever G.
2. Raise or lower the armrest.
3. Release lever G to lock armrest in
place once the desired height is
obtained.
Note - Make sure armrest is fully
engaged in the adjustment holes
and that set screw H is firmly
tightened.
57
ENGLISH
Revision 0
July 2022