Folding The Flip-Up Footplate; Adjusting Footplate Depth; Adjusting The Horizontal Angle Of The Footplate; Adjusting The Vertical Angle Of The Footplate - Physipro XL 5 Owner's Manual

ENGLISH

Folding the flip-up footplate

To fold the footplate, simply flip the footplate
upwards.

Adjusting footplate depth

1. With a 4mm Allen key, unfasten and
remove both screws D.
2. Position the footplate and insert both
screws D in the appropriate adjustment
holes and tighten screws firmly.

Adjusting the horizontal angle of the footplate

1. With a 4mm Allen key, loosen both screws
D, without removing them.
2. Pivot the footplate until the desired
horizontal angle ß is obtained.
3. Firmly tighten both screws D.

Adjusting the vertical angle of the footplate

With a ¼" Allen key, turn plastic screw E to
obtain the desired vertical angle.
Turning screw E clockwise will increase the
-
angle.
Turning screw E counterclockwise will
-
decrease the angle.
WARNING
Never lift the wheelchair by the footrest. Damage or injury may occur.
Always use the rigid parts of the frame when lifting the wheelchair.
60
XL5 and XL RF