Physipro XL 5 Owner's Manual page 82

ENGLISH
5- The straps of safety belt should be positioned in a straight a line, with no
more than 5-degree deviation between the occupant and both the left and
right anchor points.
6- Make sure the straps of the safety belt are not twisted.
7- Adjust the safety belts as firmly as possible, without impeding the
occupant's normal breathing cycle or blood circulation.
WARNING:
• Postural supports should not be used to restrain the occupant in a moving
vehicle, except if the product is labeled as being in accordance with the
requirements specified in ISO/DIS 7176-19:2019.
• Always ensure the safety belt is properly positioned and that wheelchair
components cannot interfere with the buckle and activate the opening
mechanism in the event of a collision.
Wheelchair rating in accordance with the ISO/DIS 7176-19:2019 standard:
• Rating for ease of use of the motor vehicle's three-point safety belt as
required by the ISO/DIS 7176-19:2019 standard:
o XL5 – "Excellent"
• Rating of the degree to which the use of the vehicle's three-point safety belt
adequately secures the occupant as required by the ISO/DIS 7176-19:2019
standard:
o XL5 – "Excellent"
ISO 7176-7 WHEELCHAIR CONFIGURATION MEASUREMENTS
XL5 18'' (width) x 18'' (depth) x 18'' (STF*), 18'' backrest height
XL5 17,14 kg (37,7 lbs)
XL5 120 kg (265 lb)
*STF: Seat-to-Floor Height
CRASH TEST CONFIGURATION
ISO 7176-5 WHEELCHAIR MASS MEASUREMENT
ISO 7176-11 RECOMMENDED MAXIMUM
OCCUPANT MASS MEASUREMENT
82
XL5 and XL RF