Table of Contents
Advertisement
ENGLISH
4. Adjusting Seat Depth
Please refer to Appendix B for additional details on the seat depths.
Follow these steps to modify the depth :
Using two 10 mm wrenches, unscrew screws A and B;
1.
2.
Move the backposts 1" backward or forward to get the desired depth.
Replace screws and covers A and B, tighten.
3.
4.
If you reduce the depth, you will have to take o the tube extensions, otherwise
you will have to move them. Read the following sections.
Once the desired depth is reached, adjust the tube extensions.
Follow these instructions :
Unscrew screw C with a Philips screw driver.
1.
Push, pull or remove the tube extension D
2.
to reach the actual depth.
Replace screw C, tighten.
3.
A
Figure 7 : Seat Depth Modi cation
Figure 9 : Positions for the tube's extensions
14
XL5 / XL5 CI wheelchair
B
C
D
Figure 8: Adjustment of the Tube Extensions
Advertisement
Table of Contents
