Reclining Back Bar; Tension Bar For Headrest Support - Physipro NEOX Tilt-in-Space Owner's Manual

ENGLISH

8.5 Reclining back bar

Insert the adjustable bar of the reclining back O in the tube P.
1.
Using a 4 mm Allen Key, tighten screw Q.
2.

8.6 Tension bar for headrest support

Insert R in tube S.
1.
Using a 3 mm Allen Key tighten screw T.
2.
Q
O
Figure 31 : Reclining back bar
T
R
Backpost (Left side shown)
Figure 32 : Tension bar for headrest support
26
P
S
NEOX™ Tilt-in-Space