ENGLISH
4. Adjusting Seat Depth
Please refer to Appendix B for additional details on the seat depths.
Follow these steps to modify the depth :
Using two 10 mm wrenches, unscrew screws A and B;
1.
2.
Move the backposts 1" backward or forward to get the desired depth.
Replace screws and covers A and B, tighten.
3.
4.
If you reduce the depth, you will have to take off the tube extensions, otherwise
you will have to move them. Read the following sections.
Once the desired depth is reached, adjust the tube extensions.
Follow these instructions :
Unscrew screw C with a Philips screw driver.
1.
Push, pull or remove the tube extension D
2.
to reach the actual depth.
Replace screw C, tighten.
3.
A
Figure 7 : Seat Depth Modification
Figure 9 : Positions for the tube's extensions
14
XL5 / XL5 CI wheelchair
B
C
D
Figure 8: Adjustment of the Tube Extensions