Replacing The Video/Usb Cable Assembly - IBM x3690 X5 Service Manual
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
8. From inside the server, squeeze the spring clips on both sides of the USB
9. If you are instructed to return the video/USB cable assembly, follow all
Replacing the video/USB cable assembly
To replace the video/USB cable assembly, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii and
2. From inside the server, align the USB connect and squeeze the spring clips on
3. Align the video connector with the slot on the server and install the two screws
4. Connect the video/USB cable to the connector on the system board.
5. Reinstall the fan cage assembly (see "Replacing the fan cage assembly" on page
6. Replace the cover (see "Replacing the server top cover" on page 265).
340
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
connector and pull it out of the slot.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
"Installation guidelines" on page 261.
both sides of the USB connector and insert it into the slot on the server until it
snaps into place and is seated firmly.
to secure it to the server.
332).
Advertisement
Table of Contents
