IBM x3690 X5 Service Manual page 235

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
IMM: Configuration %1 restored from
a configuration file by user %2.(%1 =
CIM_ConfigurationData.
ConfigurationName; %2 = user ID)
4000001c-00000000 Watchdog %1 Screen Capture
Occurred.(%1 = OS Watchdog or
Loader Watchdog)
Severity Description
Info A user has restored
the IMM
configuration by
importing a
configuration file.
Error An
operating-system
error has occurred,
and the screen
capture was
successful.
Action
No action; information only.
1. Reconfigure the
watchdog timer to a
higher value.
2. Make sure that the IMM
Ethernet over USB
interface is enabled in
System Settings in the
Setup utility (see "Using
the Setup utility" on
page 402 for more
information).
3. Reinstall the RNDIS or
cdc_ether device driver
for the operating
system.
4. Disable the watchdog.
5. Check the integrity of
the installed operating
system.
217
Chapter 3. Diagnostics