IBM x3690 X5 Service Manual page 234

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
40000012-00000000 Remote access attempt failed. Invalid
userid or password received. Userid is
' from WEB browser at IP address
%2.(%1 = user ID; %2 = IP address,
xxx.xxx.xxx.xxx)
40000013-00000000 Remote access attempt failed. Invalid
userid or password received. Userid is
' from TELNET client at IP address
%2.(%1 = user ID; %2 = IP address,
xxx.xxx.xxx.xxx)
40000026-00000000 The Chassis Event Log (CEL) on
system %1 cleared by user %2.(%1 =
CIM_ComputerSystem.ElementName;
%2 = user ID)
IMM reset was initiated by user
%1.(%1 = user ID)
40000016-00000000 ENET[0] DHCP-HSTN=%1, DN=%2,
IP@=%3, SN=%4, GW@=%5,
DNS1@=%6.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 = CIM_DNSProtocolEndpoint.
DomainName; %3 =
CIM_IPProtocolEndpoint.IPv4Address;
%4 =
CIM_IPProtocolEndpoint.SubnetMask;
%5 = IP address, xxx.xxx.xxx.xxx; %6 =
IP address, xxx.xxx.xxx.xxx)
40000017-00000000 ENET[0] IP-Cfg:HstName=%1, IP@%2,
NetMsk=%3, GW@=%4.(%1 =
CIM_DNSProtocolEndpoint.
Hostname; %2 =
CIM_StaticIPSettingData.
IPv4Address; %3 =
CIM_StaticIPSettingData.
SubnetMask; %4 =
CIM_StaticIPSettingData.
DefaultGatewayAddress)
40000018-00000000 LAN: Ethernet[0] interface is no
longer active.
40000019-00000000 LAN: Ethernet[0] interface is now
active.
DHCP setting changed to by user
%1.(%1 = user ID)
216
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Severity Description
Error A user has
attempted to log in
from a Web
browser by using
an invalid login ID
or password.
Error A user has
attempted to log in
from a Telnet
session by using an
invalid login ID or
password.
Info A user has cleared
the IMM event log.
Info A user has initiated
a reset of the IMM.
Info The DHCP server
has assigned an
IMM IP address
and configuration.
Info An IMM IP address
and configuration
have been assigned
using client data.
Info The IMM Ethernet
interface has been
disabled.
Info The IMM Ethernet
interface has been
enabled.
Info A user has changed
the DHCP mode.
Action
1. Make sure that the
correct login ID and
password are being
used.
2. Have the system
administrator reset the
login ID or password.
1. Make sure that the
correct login ID and
password are being
used.
2. Have the system
administrator reset the
login ID or password.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.