Replacing A Simple-Swap Sata Drive - IBM x3690 X5 Service Manual
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
5. If you are instructed to return the drive, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing a simple-swap SATA drive
To install a simple-swap SATA drive, complete the following steps:
Note: You must turn off the server before installing simple-swap drives in the
server.
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 261.
2. Touch the static-protective package that contains the new drive to any
unpainted metal surface on the server; then, remove the drive from the package
and place it on a static-protective surface.
3. Grasp the black drive handle and press down on the blue release latch and
align the drive assembly with the guide rails in the drive bay.
4. Gently push the drive assembly into the drive bay until the drive stops.
5. Reinstall the 4x4 filler panel that you removed
6. Turn on the peripheral devices and the server.
Chapter 5. Removing and replacing components
289
Advertisement
Table of Contents
