IBM x3690 X5 Service Manual page 189

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
80010903-1504xxxx Numeric sensor FG 4PS going high
(upper critical) has asserted.
80010b01-0c01xxxx Numeric sensor Ambient Temp going
high (upper non-recoverable) has
asserted.
80010b03-1501xxxx Numeric sensor FG 1PS going high
(upper non-recoverable) has asserted
Severity Description
Warning Power supply fuel
gage warning.
Error Server ambient
temperature
Overspec.
Error Power supply fuel
gage error.
Action
1. The management
controller has detected a
sensor transitioned to
critical from less severe
on the power supply 4.
2. Make sure that the
power supply is
installed correctly (see
"Replacing a hot-swap
power supply" on page
326). Make sure that no
error LEDs are lit on the
power supply and that
all power supplies have
the green LEDs lit.
1. Make sure that the
ambient temperature is
within the product
specifications for the
server.
2. Make sure that the fans
are operating properly,
there are no
obstructions to the
airflow, the air baffles
are in installed correctly,
and the server cover is
installed and completely
close.
1. The management
controller has detected a
sensor transitioned to
critical from less severe
on the power supply 1.
2. Make sure that the
power supply is
installed correctly (see
"Replacing a hot-swap
power supply" on page
326). Make sure that no
error LEDs are lit on the
power supply and that
all power supplies have
the green LEDs lit.
171
Chapter 3. Diagnostics