IBM x3690 X5 Service Manual page 213

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
806f000f-2201ffff The System %1 encountered a POST
Error.(%1 =
CIM_ComputerSystem.ElementName)
806f000f-2201ffff The System %1 encountered a POST
Error.(%1 =
CIM_ComputerSystem.ElementName)
Severity Description
Error A POST error has
occurred.(Sensor =
ABR Status)
Error A POST error has
occurred.(Sensor =
Firmware Error)
Action
1. Recover the server
firmware from the
backup page:
a. Restart the server.
b. At the prompt, press
F3 to recover the
firmware.
2. Update the server
firmware to the latest
level (see "Updating the
firmware" on page 397).
Important: Some cluster
solutions require
specific code levels or
coordinated code
updates. If the device is
part of a cluster
solution, verify that the
latest level of code is
supported for the
cluster solution before
you update the code.
3. Remove components
one at a time, restarting
the server each time, to
see if the problem goes
away.
4. If the problem remains,
(trained service
technician) replace the
system board.
1. Update the server
firmware on the
primary page.
Important: Some cluster
solutions require
specific code levels or
coordinated code
updates. If the device is
part of a cluster
solution, verify that the
latest level of code is
supported for the
cluster solution before
you update the code.
2. (Trained service
technician only) Replace
the system board.
195
Chapter 3. Diagnostics