IBM x3690 X5 Service Manual page 196

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
80070301-0301xxxx Sensor CPU n OverTemp has
80070301-0302xxxx transitioned to non-recoverable from a
less severe state.(n = microprocessor
number)
Sensor CPU n OverTemp has
transitioned to critical from a
non-recoverable state.(n =
microprocessor number)
178
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Severity Description
Error A sensor has
changed to
Nonrecoverable
state from a less
severe state.
Error A sensor has
changed to Critical
state from
Nonrecoverable
state.
Action
1. Make sure that the fans
are operating, that there
are no obstructions to
the airflow (front and
rear of the server), that
the air baffles are in
place and correctly
installed, and that the
server cover is installed
and completely closed.
2. Make sure that the heat
sink for microprocessor
n is installed correctly.
3. (Trained service
technician only) Replace
microprocessor n.
(n = microprocessor
number)
1. Make sure that the fans
are operating, that there
are no obstructions to
the airflow (front and
fear of the server), that
the air baffles are in
place and correctly
installed, and that the
server cover is installed
and completely closed.
2. Check the ambient
temperature. You must
be operating within the
specifications.
3. Make sure that the heat
sink for microprocessor
n is installed correctly.
4. (Trained service
technician only) Replace
microprocessor n.
(n = microprocessor
number)