Table of Contents
Advertisement
Chapter 2
Refer to
Section 2.5
for programming the Soft-GRAF HMI applications with ISaGRAF.
Refer to
Section 2.4
for programming the eLogger HMI application with ISaGRAF.
** The ISaGRAF WinCE ViewPAC in this manual include: (abbreviation: VP-2xW7/4xx7 )
VP-25W7, VP-23W7, VP-4137 (Support ISaGRAF logic running in the PAC)
VP-25W6, VP-23W6, VP-4136 (Support InduSoft & ISaGRAF logic running in the same PAC)
Important Notice:
1. ISaGRAF WinCE ViewPAC support only High profile I-8K and I-87K I/O cards in its slot 0 to 2. Please
refer to the accompanying CD-ROM: \napdos\isagraf\vp-25w7-23w7\english-manu\ Datasheet
files.
2. Please always set a fixed IP address to the ISaGRAF WinCE ViewPAC. (No DHCP)
Please refer to below ISaGRAF WinCE ViewPAC CD-ROM for detailed ISaGRAF User's Manual.
\napdos\isagraf\vp-25w7-23w7\english-manu\ "user_manual_i_8xx7.pdf"
NOTE:
The ISaGRAF WinCE ViewPAC supports ISaGRAF programming method & provides Web HMI solution
by default. If user would like to program the VP-2xW7 by using both ISaGRAF & (EVC++ 4.0 or VS.NET
2008 or C# .NET), it is also possible. Please refer to
Software Installation And Working Soft-GRAF
HMI with ISaGRAF
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Chapter
6,
Chapter
7,
Chapter
10.
2-1
Advertisement
Table of Contents
