ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 78

Please follow the similar steps to insert one another "Layer5" and one "Layer6" with a "K2" symbol
inside it, and also a "Layer7" with a "OK" symbol inside it as below.
We will use "K1" to display the state of the first input of the I-87055W board, and "K2" for its second
input.
1. Click here to insert "Layer5"
2. Follow the similar steps as
former to insert "Layer6" &
"Layer7" inside the "Layer5"
Please follow the similar steps to insert "OUT01" & "OUT02" as below. The OUT01 uses
"./img/circle_blue0.jpg" as its image source, while OUT02 using "./img/cmd0.jpg".
Layer10
4-28
Layer9
Layer8
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Layer6
Layer11
Layer12
Layer13
Layer5
Layer7