Multi; Level 2 And Level 3 Page - ICP DAS USA ISaGRAF WinCE ViewPAC User Manual

5.5 Multi-Pages
The Web HMI in the ISaGRAF WinCE ViewPAC supports multi-pages application.
You may refer to Chapter 3

5.5.1 Level 2 And Level 3 Page

The multi-page name can be any valid html file name. For example, "page2.htm", "kitchen.htm" ,
"u2-page4.htm" .
If "u2-" appear in front of the page name, the page will become a Level 2 page. For example, the
"u2-Page4.htm" in the "vphmi_05" demo. If "u3-" appear in front of the page name, the page will
become a Level 3 page. For example, the "u3-time.htm" in the "vphmi_05" demo.
What is a Level2 page? Only users login with the Middle or High priority can get access to it. To access to
the Level3 page, users have to login as a High priority user. The page name without "u2-" and "u3-" is
identified as Level 1 page. That means any user successfully login can access to it. For example, the
"main.htm"
The other rules for multi-pages are almost the same as "main.htm"
Note: If "Enable Account Security" is not check, any user can easily get access to your ISaGRAF WinCE
ViewPAC through the Internet Explorer.
to setup the multi-page demo – "vphmi_05" to see how it works.
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
(section 5.4)
5-17